Quality & Testing Technician - Junior

White rust, red rust, salt frost: identify before you blame | QLQ

The question every buyer asks

Misconception: failing a part for any white deposit straight out of the chamber is the biggest source of acceptance disputes — white rust, red rust, and salt frost are three different things; only the first is commonly a fail, and only per clause.

This page answers White rust, red rust, salt frost: identify before you blame — a top recurring question from real QLQ customers — with the line-level detail our technicians actually use. Parameters are industry-standard starting ranges; confirm against your supplier TDS.

White rust, red rust, salt frost: identify before you blame - QLQ workshop photo
QLQ workshop — QLQ workshop photo

Reference table

DepositJudgementBasisMisuse risk
White rustper clausemost zinc clauses count spots/timescrapping on sight → disputes
Red rustfailbase corrosion = plating failurebundled into "white" and passed by mistake
Salt frostre-inspect after rinseremovable crystalsmisread as white rust → good parts scrapped
White rust, red rust, salt frost: identify before you blame - QLQ workshop photo
Process close-up — QLQ workshop photo

How we handle it on the line

  • Definitions: white rust = zinc's own oxidation product (won't wipe off, raised); red rust = base iron exposed (fatal); salt frost = salt crystallization (washes off, not a defect).
  • Options: arbitration flow = rinse → dry → re-inspect → judge white rust per clause.
  • The clause itself must state two criteria: hours to white rust and to red rust; an acceptance clause reading only "passes salt spray" is a blank check.
  • QLQ reports include before/after photos plus post-rinse re-inspection photos.
  • Ask: does our clause distinguish white/red rust and salt frost?
  • Honest boundary: tolerance for white rust differs by industry clause (structural zinc often allows counted spots within time) — follow your industry clause, not anecdote.

Honest boundaries

  • Next step: mail disputed parts to QLQ for re-inspection with a rinse-and-reinspect comparison report.

FAQ

Can QLQ provide test reports with the delivery?
Yes — salt spray, thickness and adhesion reports are attached per lot on request.
Can QLQ provide test reports with the delivery?
Yes — salt spray, thickness and adhesion reports are attached per lot on request.
Can QLQ provide test reports with the delivery?
Yes — salt spray, thickness and adhesion reports are attached per lot on request.
Previous Post
Trivalent vs hexavalent chromate: cost, color, salt spray | QLQ
Next Post
Can salt spray hours translate into service years? | QLQ