Quality & Testing Technician - Senior

Nickel plating thickness vs salt spray hours: the real chart | QLQ

The question every buyer asks

Misconception: "how many salt-spray hours can you pass?" is the most-asked and most-misquoted hardware question — because hours mean nothing without base material and plating system.

This page answers Nickel plating thickness vs salt spray hours: the real chart — a top recurring question from real QLQ customers — with the line-level detail our technicians actually use. Parameters are industry-standard starting ranges; confirm against your supplier TDS.

Nickel plating thickness vs salt spray hours: the real chart - QLQ workshop photo
QLQ workshop — QLQ workshop photo

Reference table

SystemTypical tierMisuse risk
Zinc + passivate24–96h NSSdemanding chrome-tier hours on zinc parts → quote chaos
Cu + Ni + Cr multilayer48–200h CASSwriting "multilayer" without microns → inflated claims
Stainless baseintrinsic + plating bonusquoting 304 at 316 prices → material fraud room
Nickel plating thickness vs salt spray hours: the real chart - QLQ workshop photo
Process close-up — QLQ workshop photo

How we handle it on the line

  • Definitions: NSS (neutral, GB/T 10125 / ASTM B117) mainly for zinc-plated parts; CASS/AASS (acid) for decorative nickel/chrome systems; white rust = zinc oxidation, red rust = base exposed.
  • Micron-to-hours depends on the system: e.g., a zinc-alloy slider passing a 72h NSS tier typically runs copper 4–5 μm + nickel 11–14 μm + chrome flash 0.2–0.3 μm.
  • Options: QLQ's in-house plating shop publishes a "system – microns – measured salt-spray hours" correlation table; quotations follow tiers: standard hardware 48h, mid-range 72h, outdoor/coastal 96h+.
  • Samples ship with measured reports; production batches are re-tested.
  • Ask three questions: 1) what is my base material?
  • 2) target tier (hours to white rust / red rust)?

Honest boundaries

  • 3) is the report sample-level or batch-level?
  • These filter most inflated plating claims.
  • Honest boundary: salt spray is accelerated corrosion, not a direct lifetime conversion (see the next entry); we promise measured data, never "hours = years."
  • Next step: send base material + target tier; QLQ replies within 48 hours with the tiered quotation and plated samples.

FAQ

Can QLQ provide test reports with the delivery?
Yes — salt spray, thickness and adhesion reports are attached per lot on request.
Can QLQ provide test reports with the delivery?
Yes — salt spray, thickness and adhesion reports are attached per lot on request.
Can QLQ provide test reports with the delivery?
Yes — salt spray, thickness and adhesion reports are attached per lot on request.
Previous Post
How many salt spray hours? NSS or CASS for your spec | QLQ
Next Post
What Do Plating Chemicals Really Cost Per Year? The Line-Owner's Calculation (with Real Formulas)