Wet Film Thickness Gauge Practice: On-Part Checks During Spraying
Rack Painting - Intermediate

Wet Film Thickness Gauge Practice: On-Part Checks During Spraying

Wet Film Thickness Gauge Practice: On-Part Checks During Spraying.

A working reference for the painting line. Numerical settings in the process diagram are examples, not universal operating limits. Follow the coating technical data sheet, equipment instructions and the validated process for your parts. Scenarios below illustrate checks and are not verified customer results.

Hook build-up
Strip on schedule
Wet film check
Every color first part
Bake record
Keep every strip
Hanging spray paint line with loaded racks for zipper pullers
Hanging spray paint line with loaded racks for zipper pullers

Common Mistakes and How to Avoid Them

MistakeWhy It HappensPractical Fix
1. Spraying on built-up hooksPaint flakes contaminate fresh workStrip hooks on schedule
2. Judging bake by lookUnder-bake passes visual, fails adhesionRecord strips; keep archive

Best Practices

  • Hook strip schedule by cycle count
  • Wet film gauge at the booth
  • Bake strip archive per week

Hook and Bake Discipline

  1. Check hook build-up - Strip per schedule (Flakes ruin fresh paint)
  2. Wet film first part - Adjust before continuing (Never skip first-part check)
  3. Bake strip in oven - File the record (Look is not cure)

Strip schedule by cycles | Archive reviewed weekly

Hanging Line Reference

Confirm application and bake limits against the coating technical data sheet and the validated production specification.

ParameterReferenceWhy It Matters
Hook build-up stripPer cycle countFlakes contaminate fresh work
Wet film thicknessPer approved specificationAdjust at first part, not after
Flash-offPer data sheetBalances flow and dust
Bake curveRecorder verifiedUnder-bake fails adhesion

First-part wet film checks

Scenario. Film build drifted after color changes and passed visual checks.

Action. Wet film gauge check on the first part of every color.

Check. Confirm wet film thickness and cured coating adhesion before releasing the batch.

Frequently Asked Questions

How often should hooks be stripped?

On a cycle count, before build-up flakes. Flakes land on fresh paint.

Why check wet film on the first part?

Every color change shifts the setup. One reading per change prevents a whole run at the wrong film.

Is a visual bake check enough?

No. Under-bake passes visually and fails adhesion testing. Recorder strips are the evidence.

Implementation Roadmap

StepFrequency
Hook care liveEvery cycle
Wet film checks liveWeek 1
Changeover sequencing planMonth 1

What Would You Like to Solve?

If you would like this checklist or template adapted to your own line and part mix, contact QLQ we supply the full equipment and chemistry package along with the working documents that make it run.

Rack Painting LineINTERMEDIATEWet Film Thickness Gauge Practice: On-Part Checks During SprayingOperatorWet film 60-80 um. More paint gives sags, not morecoverage.ChemistFlash-off 5-10 min at 22-25 C - trapped solvent pops inthe oven.QCCross-hatch on every colour, plus pencil hardness on thebatch.ManagerColour changes need validated sequencing and flushing;check for carryover before production.STEP 1Hang & MaskLoad densityMask jigClean hooks1STEP 2Spray BoothGun 20-25 cmWet film 60-80 umBooth 22-25 C2STEP 3Flash-Off5-10 minSolvent outAir flow3STEP 4Bake140-160 C15-25 minMetal 130 C4STEP 5Unload & QCFilm gaugeGloss checkAdhesion5!Oil in compressed air can cause fisheyes; check air, paint and surface cleanliness.COMMON MISTAKES vs WHAT WORKSchecks for your linexHeavier coat for better coveragev60-80 um wet film; sags come from excessxSkip flash-off when the line is busyvUse the validated flash-off time and conditionsxChange colour without a validated cleaning planvValidate the colour sequence and flushing60-80 umFilm140-160 CBake> 93%First passILLUSTRATIVE CHECKExample: check compressed-air oil contamination when investigating fisheyes.QLQ Surface Treatment | steps, roles, checkpoints, mistakes and an example
Rack Painting Line - process board with operator, chemist, QC and management notes, mistakes and a case.

FAQ - Wet Film Thickness Gauge Practice: On-Part Checks During Spraying

Straight answers from the shop floor. Ask us on WhatsApp if your case is different.

How do I fix it on the line?
Action. Wet film gauge check on the first part of every color.
What must be checked before running?
Wet Film Thickness Gauge Practice: On-Part Checks During Spraying.
What result should I expect?
Check. Confirm wet film thickness and cured coating adhesion before releasing the batch.
Previous Post
Flash-Off and Bake Window Tuning for Hanging Lines
Next Post
Hang-Paint Hook Care: Build-Up Removal and Contact Point Standards