The question every buyer asks
Buyers ask whether orange peel on powder coating is a defect or acceptable — the honest answer is that it depends entirely on what the acceptance criteria say. Satin and matte powders are inherently orange-peel textured, while orange peel on a gloss powder is a real defect.
Parameters are industry-standard starting ranges; confirm against your supplier TDS.

How we handle it on the line
- Term: orange peel is a wave-like surface texture; on satin/matte powders it is the intended finish, not a flaw.
- Orange peel on a high-gloss powder indicates a defect: poor powder leveling, wrong film thickness, or oven-temperature/conveyor-speed fluctuation.
- Acceptance clause 1: a sealed reference sample defines the texture baseline — no sample, no dispute resolution.
- Acceptance clause 2: agreed film-thickness range, typically 60-100μm.
- Acceptance clause 3: gloss tolerance, typically ±5GU against the sealed sample.
- Misuse risk: comparing against a sealed sample made with a different powder brand — inherent texture differences make the dispute unsolvable.
- QLQ accepts coated parts on dual criteria (sealed sample + film thickness), records powder brand and batch in shipping documents; the Bangladesh paint plant applies the same rules to its coated parts.
Honest boundaries
- Orange peel on matte/satin finishes is by design and is not a valid rejection ground.
- Gloss and texture readings are instrument values; final appearance still needs the agreed sealed sample as arbiter.
- Different powder brands texture differently — acceptance baselines cannot be mixed across brands.
FAQ
Is orange peel on powder coating a defect I can reject?
Only on high-gloss powder, where it signals leveling or oven problems. Satin and matte powders are orange-peel textured by design — judge against your agreed sealed sample, not against a gloss ideal.
How should we define appearance acceptance for powder-coated parts?
Three clauses: a sealed sample as texture baseline, film thickness 60-100μm, and gloss ±5GU. QLQ accepts on dual criteria of sealed sample plus measured film thickness.
Who decides if the orange peel on my batch matches the sample?
The sealed sample made with the same powder brand and batch. Comparing across powder brands creates unsolvable disputes — QLQ records powder brand and batch in every shipping document.
Can oven settings really change the texture between batches?
Yes — oven temperature and conveyor speed fluctuations worsen leveling and deepen orange peel on gloss powders. That is why batch parameters, not just samples, should be on record.