Professional Zinc Alloy Surface Finishing Solutions
Antique Bronze Solution QLQ-20B
Antique Bronze Solution QLQ-20B
Generează cod QR
-
Estimated Delivery:Oct 02 - Oct 06
-
Free Shipping & Returns: On all orders over $75
Product description
Shipping & Return
Product Overview
Antique Bronze Coloring Solution QLQ-20B is QLQ's ready-to-use chemical coloring system that turns copper, brass and bronze-plated parts into the classic antique bronze / old-bronze finish - the dark brown-black relief look with highlighted edges that dominates belt buckles, bag hardware and decorative accessories. Unlike paint or plating, chemical coloring is a controlled conversion reaction: sulfur-bearing agents react with the copper surface to grow a uniform cupric-sulfide/tarnish film in seconds. Color depth is controlled by immersion time and temperature, not by current - which is why the finish follows every contour of the part perfectly. Comparable generic systems on the market (selenium-based or polysulfide "liver of sulfur" brews) need in-house mixing and are inconsistent between batches; QLQ-20B ships as a stabilized concentrate so your color matches from week to week.
Product Identity (Encyclopaedia Card)
| Property | Value |
|---|---|
| Chemical name | Antique Bronze Solution QLQ-20B |
| Chemical formula | Proprietary copper-tin complex solution (Component B) |
| CAS number | Mixture |
| Appearance | Dark blue to blue-green clear liquid |
| Grade / type | QLQ-20B, component B |
| Standard packing | 25 L HDPE jerry can; 200 L plastic drum |
What it is and what it does. Antique bronze solution QLQ-20B is component B of the two-part QLQ-20 antiquing system for copper-tin alloy deposits, producing the warm brown antique bronze tone used on zipper sliders and bag hardware.
- Dark blue to blue-green clear liquid; used in a two-component system where the ratio of A to B sets the final colour.
- Works on bronze and imitation bronze deposits - the base deposit is what gives the finish its depth.
- Always add component B to the working bath slowly with agitation, never the other way round.
Typical Use in a Plating / Finishing Line
| Item | Typical guidance |
|---|---|
| Working bath | Mix QLQ-20A and QLQ-20B in the ratio stated on the process sheet |
| Operating conditions | Room temperature to 40 C, 30 seconds to 3 minutes depending on the depth of colour wanted |
| Control | Colour compared against a retained master sample; top up both components together |
Safety, Handling & Storage
| Item | Requirement |
|---|---|
| Hazard classification | Not classified as dangerous for transport in most cases; observe good industrial hygiene and dust control |
| Personal protective equipment | Dust mask, goggles and gloves for powder handling; general ventilation |
| Spill / first aid | Sweep up dry; material is a nuisance dust — avoid breathing the dust |
| Storage | Cool, dry, sealed store; keep bags closed, off the floor and away from moisture |
| Transport | Classified and packed according to IATA/IMDG for the hazard class; UN number and packing group stated on the shipping documents |
Quality Documents Shipped With Every Batch
| Document | Comment |
|---|---|
| COA (certificate of analysis) | Provided with the shipment; batch traceable to the production date |
| MSDS (safety data sheet) | Provided with the shipment; batch traceable to the production date |
| Packing list | Provided with the shipment; batch traceable to the production date |
| Commercial invoice | Provided with the shipment; batch traceable to the production date |
| Certificate of origin on request | Provided with the shipment; batch traceable to the production date |
Buyer Questions We Answer Every Week
| Question | Answer |
|---|---|
| How do I hold the colour constant? | By keeping the A to B ratio fixed and by replacing a portion of the bath on a schedule rather than only topping up. |
| Why is the colour coming out too dark? | Usually too long an immersion or a drifted metal content; shorten the time first and then check the analysis. |
| Item | Typical Value |
|---|---|
| System | Sulfur-based conversion coloring (aqueous) |
| Color produced | Antique bronze / chocolate brown-black relief |
| Working concentration | 20-50 ml/L in water (depth-dependent) |
| Temperature | 25-40°C (warmer = faster, darker) |
| Immersion time | 10-60 seconds |
| Bath life | 4-8 weeks depending on loading |
| Standard packing | 25KG drum / 5KG drum |
The Complete Antique Process (Where 20B Sits)
| Step | Operation | Typical |
|---|---|---|
| 1. Base plate | Bright copper or bronze-tone plate on parts | 3-8 μm copper |
| 2. Activate / clean | Alkaline soak + dilute acid dip | 1-2 min each |
| 3. Color with QLQ-20B | Immerse, agitate gently | 10-60 s to target depth |
| 4. Rinse | Two counterflow rinses | 30 s |
| 5. Highlight (relief) | Tumble / vibratory with media, or hand-nib on edges | 10-30 min |
| 6. Neutralize | Dilute QLQ neutralizing salt dip | 30 s |
| 7. Seal / lacquer | Clear lacquer (e.g. QLQ-L55) to stop tarnish drift | spray or dip |
The highlight step is what makes antique bronze "antique": high spots lose some color film and shine, recesses stay dark. Consistent coloring (step 3) is what makes every batch of buckles look identical - that is the QLQ-20B job.
Quality Control Points
| Check | Method | Pass |
|---|---|---|
| Color speed | Test panel in fresh 30 ml/L bath at 30°C | Deep even color in 20-40 s |
| Color uniformity | Compare 10 parts from same batch under D65 light | No patchiness, no red/green tint zones |
| Adhesion of film | Press tape on colored panel, rip | No film transfer to tape |
| Bath strength | Time-to-color vs fresh reference | When time doubles, add concentrate or remake |
How QLQ controls it: every 20B batch is made against a retained reference and verified on copper panels for color speed and hue before release. Customers in Bangladesh, Pakistan and India run monthly shade-matching checks with our engineers so a buckle colored today matches one colored six months ago - that consistency is what European bag brands audit.
Common Problems & Fixes (Workshop Table)
| Problem | Root cause | Fix |
|---|---|---|
| Color too light, slow | Bath exhausted or too cold | Add 20B to 40-50 ml/L; warm to 35°C |
| Black sooty patches | Bath too strong or parts not rinsed after acid | Dilute to 20 ml/L; improve rinse before coloring |
| Red / greenish tint | Surface still oxidized or chloride in water | Activate properly; use DI or low-chloride water |
| Color washes off in highlight | Film grown too thin; over-rinsing with hot water | Longer immersion; rinse cool and gently |
| Color drifts week to week | No bath analysis; eyes-only control | Keep time-to-color log; standardize temp with a thermometer, not feel |
Handling & Safety
- Ventilation: sulfur-based color baths release mild sulfurous odor - keep tanks ventilated; do not lean over the bath.
- PPE: gloves and goggles; the concentrate is irritating to skin and eyes. Wash splashes immediately with water.
- Never mix with acids in the same tank - releases toxic hydrogen sulfide gas. Keep the color tank strictly alkaline-neutral.
- Storage: closed drums, cool and dark. Partly-used drums must be resealed (air oxidation slowly weakens the solution). 12-month shelf life sealed.
- Waste: spent bath carries copper - collect for metal recovery or licensed disposal, never to drain.
What It Does on Iron, Zinc Alloy, Copper and Stainless Steel Parts
| Substrate | Role / behavior of 20B | Practice |
|---|---|---|
| Copper / brass parts | Direct coloring - the classic application; reaction is fastest and most uniform | Best substrate; 10-40 s immersion |
| Zinc alloy (sliders, buckles) | Does not color zinc evenly - parts must carry a copper or bronze plate first | Copper plate 3-6 μm, then color; standard slider route |
| Iron / steel hardware | Same as zinc: color only after copper underplate; also protects against red-rust show-through | Copper plate then color; seal well against humidity |
| Stainless steel | Chemical bronze color barely reacts - not the right tool; use plated-then-colored route | Avoid; plate copper/bronze first if antique look is wanted |
FAQ
| Question | Answer |
|---|---|
| Can I mix 20B with other antique solutions? | No. Sulfur chemistry is sensitive; mixing changes hue unpredictably. Keep dedicated tanks and tools. |
| Why does my color look different in summer? | Temperature drives reaction speed. Control bath at 30±3°C and time your immersion - then summer and winter match. |
| Do we still need lacquer after coloring? | Yes for wear parts. The sulfide film is decorative, not hard; a clear lacquer (QLQ-L55) locks color and adds abrasion life. |
| Can QLQ match a shade sample from our brand? | Yes. Send the physical sample; our lab adjusts the 20B working parameters and provides a written recipe with time/temperature for your line. |
Shade-matching trouble? QLQ supports antique-bronze lines in 10+ countries with recipes and on-site-style remote training. Contact us with your target sample.
Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price.We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.
