collection-banner-image collection-banner-image

Professional Zinc Alloy Surface Finishing Solutions

Mould Technician - Senior

Venting and Gate Wear Diagnosis on Slider Moulds: What Defects Tell You
2026-09-23 00:00:00

Venting and Gate Wear Diagnosis on Slider Moulds: What Defects Tell You

阅读更多Venting and Gate Wear Diagnosis on Slider Moulds: What Defects Tell You
Die-Casting Mould Steel and Surface Treatment Decisions: Base Steel, Nitriding Depth and When to Upgrade
2026-09-03 19:46:15

Die-Casting Mould Steel and Surface Treatment Decisions: Base Steel, Nitriding Depth and When to Upgrade

阅读更多Die-Casting Mould Steel and Surface Treatment Decisions: Base Steel, Nitriding Depth and When to Upgrade
Water Leak Inside the Mould: Tracing a Cooling Channel Crack to Over-Tight Clamping
2026-08-31 00:00:00

Water Leak Inside the Mould: Tracing a Cooling Channel Crack to Over-Tight Clamping

阅读更多Water Leak Inside the Mould: Tracing a Cooling Channel Crack to Over-Tight Clamping
Die-Casting Mould Refurbishment Planning: Measurement, Re-Nitriding and Life Extension
2026-08-25 14:03:00

Die-Casting Mould Refurbishment Planning: Measurement, Re-Nitriding and Life Extension

阅读更多Die-Casting Mould Refurbishment Planning: Measurement, Re-Nitriding and Life Extension
Die-Casting Mould Failure Analysis: Cracks, Soft Spots and the Heat-Treatment Evidence
2026-08-25 14:02:59

Die-Casting Mould Failure Analysis: Cracks, Soft Spots and the Heat-Treatment Evidence

阅读更多Die-Casting Mould Failure Analysis: Cracks, Soft Spots and the Heat-Treatment Evidence
Senior Mould Troubleshooting: Wear Failure, Repair Decisions and the Diagnosis That Saves the Tool
2026-08-25 09:44:35

Senior Mould Troubleshooting: Wear Failure, Repair Decisions and the Diagnosis That Saves the Tool

阅读更多Senior Mould Troubleshooting: Wear Failure, Repair Decisions and the Diagnosis That Saves the Tool
Die-Casting Mould Care: Gating, Venting, Cooling and Wear Control That Keep Parts Consistent Shift After Shift
2026-08-24 18:51:10

Die-Casting Mould Care: Gating, Venting, Cooling and Wear Control That Keep Parts Consistent Shift After Shift

阅读更多Die-Casting Mould Care: Gating, Venting, Cooling and Wear Control That Keep Parts Consistent Shift After Shift